DSX-4000 Electrodynamic Shaker - 16" armature, 1 inverter
|Stray Magnetic Field (gauss) :||Less than 8|
|Shock vs. Load Rating Lbs / Kg :||30g: 375 / 170|
50g: 200 / 91
75g: 19 / 8.6
|Approx. Shaker Weight:||6,000 lbs|
|Shaker Dimensions—WxDxH:||38 x 53 x 33 inches|
97 x 134 x 84 centimeters
|Payload Support :||1,000 lbs|
|Maximum Velocity—Sine Sweep in ips/mps:||70 / 1.78|
|Heat Rejected (Maximum):||59,000 BTUH|
|Frequency Range:||0-3,000 Hz|
|Force Rating in Sine Peak:||4,000 lbf |
|Force Rating in Random RMS:||4,000 lbf |
|Electrical Requirements in Full Load Amps 460 / 3 / 60:||40 Amp|
|Electrical Requirements in Full Load Amps 400 / 3 / 50:||45 Amp|
|Displacement:||3” (76.2mm) pk-pk |
(sine, random, shock)
|Console Dimensions—WxDxH:||34 x 32 x 78.5 inches|
86 x 81 x 199 centimeters
|Blower Weight:||145 lbs|
|Blower Motor:||5 Hp (3.8 kW)|
|Cooling Blower Duct Diameter:||8 inches|
|Blower Dimensions—WxDxH:||25 x 23 x 26 inches|
64 x 58 x 66 centimeters
|Axial Resonance:||2,200 Hz|
|Armature Size:||16 inches|
|Airflow:||550 CFM (0.26m3/s)|
- Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
- Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
- Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
- Mounting Points: Aluminum inserts 3/8-16 UNC standard, stainless and other threads available.
- Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 5 gauss at full field. For vertical electrodynamic shaker systems only.
- Blower Dimensions: Are nominal for a 460/3/60 system. For vertical electrodynamic shaker systems only.
- Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
- Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
- Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
- Automatic centering with indicators and optical electronic overtravel protection.
- This model can have payload capacity increased from 1,000lbs to 1,500lbs as an option.