Environmental & Vibration Testing
Equipment Manufacturer

Phone: 616.393.4580

DSX-12000 Electrodynamic Shaker - 24" armature, 5 inverters

Stray Magnetic Field (gauss) : Less than 20
Shock vs. Load Rating Lbs / Kg : 30g: 1,485 / 675
50g: 635 / 289
100g: 80 / 36.4
Approx. Shaker Weight: 9,000 lbs
4,083 kg
Shaker Dimensions—WxDxH: 48 x 51 x 38 inches
122 x 130 x 96 centimeters
Payload Support : 1,000 lbs
454 kg
Mounting Points: 25
Maximum Velocity—Sine Sweep in ips/mps: 90 / 2.29
Mass: 115 lbs
52.3 kg
Heat Rejected (Maximum): 176,000 BTUH
Frequency Range: 0-2,750 Hz
Force Rating in Sine Peak: 12,000 lbf
53.4 kN
Force Rating in Random RMS: 12,000 lbf
53.4 kN
Electrical Requirements in Full Load Amps 460 / 3 / 60: 130 Amp
Electrical Requirements in Full Load Amps 400 / 3 / 50: 150 Amp
Displacement: 3” (76.2mm) pk-pk
(sine, random, shock)
Console Dimensions—WxDxH: 34 x 32 x 78.5 inches
86 x 81 x 199 centimeters
Blower Weight: 530 lbs
241 kg
Blower Motor: 20 Hp (15.1 kW)
Cooling Blower Duct Diameter: 8 inches
20 centimeters
Blower Dimensions—WxDxH: 51 x 36 x 48 inches
130 x 92 x 122 centimeters
Axial Resonance: 1,925 Hz
Armature Size: 24 inches
61 centimeters
Amplifier Model: 960/5
Airflow: 1100 CFM (0.49m3/s)
Notes
  • Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
  • Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
  • Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
  • Mounting Points: Stainless inserts 3/8-16 UNC standard, other threads available.
  • Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 8 gauss at full field. For vertical electrodynamic shaker systems only. 
  • Blower Dimensions: Are nominal for a 460/3/60 system.
  • Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
  • Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
  • Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
  • Automatic centering with indicators and optical electronic overtravel protection.
  • This model can have payload capacity increased from 1,000lbs to 1,500lbs as an option.