Environmental & Vibration Testing
Equipment Manufacturer

Phone: 616.393.4580

DSX-6650 Electrodynamic Shaker - 16" armature, 2 inverters

Stray Magnetic Field (gauss) : Less than 8
Shock vs. Load Rating Lbs / Kg : 30g: 750 / 340
50g: 280 / 127
85g: 45 / 20
Approx. Shaker Weight: 6,000 lbs
2,722 kg
Shaker Dimensions—WxDxH: 38 x 53 x 33 inches
97 x 134 x 84 centimeters
Payload Support : 1,000 lbs
454 kg
Mounting Points: 17
Maximum Velocity—Sine Sweep in ips/mps: 90 / 2.28
Mass: 66.5 lbs
30.2 kg
Heat Rejected (Maximum): 81,200 BTUH
Frequency Range: 0-3,000 Hz
Force Rating in Sine Peak: 6,650 lbf
29.6 kN
Force Rating in Random RMS: 6,650 lbf
29.6 kN
Electrical Requirements in Full Load Amps 460 / 3 / 60: 60 Amp
Electrical Requirements in Full Load Amps 400 / 3 / 50: 70 Amp
Displacement: 3” (76.2mm) pk-pk
(sine, random, shock)
Console Dimensions—WxDxH: 34 x 32 x 78.5 inches
86 x 81 x 199 centimeters
Blower Weight: 385 lbs
175 kg
Blower Motor: 10 Hp (7.5 kW)
Cooling Blower Duct Diameter: 8 inches
20 centimeters
Blower Dimensions—WxDxH: 43 x 30 x 44 inches
109 x 76 x 112 centimeters
Axial Resonance: 2,200 Hz
Armature Size: 16 inches
40.6 centimeters
Amplifier Model: 930/2
Airflow: 800 CFM (0.38m3/s)
Notes
  • Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
  • Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
  • Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
  • Mounting Points: Aluminum inserts 3/8-16 UNC standard, stainless and other threads available.
  • Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 5 gauss at full field. For vertical electrodynamic shaker systems only. 
  • Blower Dimensions: Are nominal for a 460/3/60 system.
  • Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
  • Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
  • Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
  • Automatic centering with indicators and optical electronic overtravel protection.
  • This model can have payload capacity increased from 1,000lbs to 1,500lbs as an option.