Home / Environmental Test Equipment / Specialty / Thermal Shock Chamber / Automated Thermal Stress System / ATSS-130-6-6 Thermal Cycling & Thermal Shock Chamber
ATSS-130-6-6 Thermal Cycling & Thermal Shock Chamber
|Transfer Basket Dimensions—WxDxH:|| 25 x 23 x 14.5 inches|
63 x 58 x 37 centimeters
|Temperature Range Hot Zone::|| +25°C to +215°C|
(+77°F to +419°F)
|Temperature Range Cold Zone:|| -73°C to +180°C |
(-100°F to +356°F)
|Temperature Control Tolerance:|| +/-1.1°C |
|Approx. Shipping Weight:|| 2,160 lbs|
|Maximum Weight Capacity in Basket Pounds / Kg:|| 100 lbs|
|Move-In Dimensions—WxDxH:|| 49 x 83 x 83 inches|
124 x 211 x 211 centimeters
|Compressor Size:||(2) 6 Hp Air-cooled|
|Airflow:||1,200 SCFM (33.9 cubic meters / minute)|
|Electrical Requirements in Full Load Amps 460 / 3 / 60:||57|
|Electrical Requirements in Full Load Amps 400 / 3 / 50:||63|
|Electrical Requirements in Full Load Amps 230 / 3 / 60:||115|
- Environmental chamber performance is based upon 60 Hz and laboratory ambient conditions of 23.9°C (75°F) with 50% relative humidity, and may vary slightly on 50 Hz power or at other temperature and humidity levels.
- It is Thermotron’s understanding that the environmental chamber will be used in a non-hazardous environment. The test chamber is not designed for use with or for the purpose of processing hazardous materials. If hazardous materials are involved, please consult the factory for an alternative quote for a properly designed unit.
- Environmental Chambers are not designed for open petroleum products. Any applications involving open transmission fluids, oils, etc. need to be examined by the applications group for suitable protection.
- Specifications are subject to change without notice.