Home / Environmental Test Equipment / Vibration / Electrodynamic Shakers / DSX-12000 Electrodynamic Shaker – 16″ armature
DSX-12000 Electrodynamic Shaker – 16″ armature
| Force Rating in Sine Peak: | 12,000 lbf 53.4 kN |
| Force Rating in Random RMS: | 12,000 lbf 53.4 kN |
| Shock vs. Load Rating Lbs / Kg: | 30g: 1,245 / 565 50g: 585 / 265 100g: 38 / 17 |
| Maximum Velocity—Sine Sweep in ips/mps: | 90 / 2.29 |
| Displacement: | 3” (76.2mm) pk-pk (sine, random, shock) |
| Frequency Range: | 0-2,750 Hz |
| Armature Mass: | 125 lbs 57.0 kg |
| Armature Size: | 16 inches 40.6 centimeters |
| Axial Resonance: | 2,200 Hz |
| Mounting Points: | 17 |
| Payload Support: | 1,000 lbs 454 kg |
| Stray Magnetic Field (gauss): | Less than 20 |
| Approx. Shaker Weight: | 9,000 lbs 4,083 kg |
| Shaker Dimensions—WxDxH: | 48 x 51 x 38 inches 122 x 130 x 96 centimeters |
| Cooling Blower Duct Diameter: | 8 inches 20 centimeters |
| Blower Motor: | 20 Hp (15.1 kW) |
| Blower Dimensions—WxDxH: | 51 x 36 x 48 inches 130 x 92 x 122 centimeters |
| Blower Weight: | 530 lbs 241 kg |
| Airflow: | 1100 CFM (0.49m3/s) |
| Amplifier Model: | 960/4 |
| Console Dimensions—WxDxH: | 34 x 32 x 78.5 inches 86 x 81 x 199 centimeters |
| Heat Rejected (Maximum): | 176,000 BTUH |
| Electrical Requirements in Full Load Amps 460 / 3 / 60: | 130 Amp |
| Electrical Requirements in Full Load Amps 400 / 3 / 50: | 150 Amp |
Notes
- Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
- Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
- Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
- Mounting Points: Stainless inserts 3/8-16 UNC standard, other threads available.
- Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 8 gauss at full field. For vertical electrodynamic shaker systems only.
- Blower Dimensions: Are nominal for a 460/3/60 system.
- Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
- Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
- Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
- Automatic centering with indicators and optical electronic overtravel protection.
- This model can have payload capacity increased from 1,000lbs to 1,500lbs as an option.