Home / Environmental Test Equipment / Vibration / Electrodynamic Shakers / DSX-2500 Electrodynamic Shaker – 12″ armature
DSX-2500 Electrodynamic Shaker – 12″ armature
| Force Rating in Sine Peak: | 2,500 lbf 11.1 kN |
| Force Rating in Random RMS: | 2, 500 lbf 11.1 kN |
| Shock vs. Load Rating Lbs / Kg: | 30g: 330 / 150 50g: 175 / 79 100g: 25 / 11 |
| Maximum Velocity—Sine Sweep in ips/mps: | 120 / 3.05 |
| Displacement: | 3” (76.2mm) pk-pk (sine, random, shock) |
| Frequency Range: | 0-3,000 Hz |
| Armature Mass: | 33.25 lbs. 15.0 kg |
| Armature Size: | 12 inches 30.5 centimeters |
| Axial Resonance: | 2,180 Hz |
| Mounting Points: | 16 |
| Payload Support: | 500 lbs. 227 kg |
| Stray Magnetic Field (gauss): | Less than 5 |
| Approx. Shaker Weight: | 1,980 lbs. 898 kg |
| Shaker Dimensions—WxDxH: | 26 x 40 x 34 inches 66 x 102 x 86 centimeters |
| Cooling Blower Duct Diameter: | 6 inches 15.2 centimeters |
| Blower Motor: | 3 Hp (2.2 kW) |
| Blower Dimensions—WxDxH: | 26 x 32 x 32 inches 66 x 81 x 81 centimeters |
| Blower Weight: | 323 lbs. 147 kg |
| Airflow: | 550 CFM (0.26 m3/s) |
| Amplifier Model: | 916/1 |
| Console Dimensions—WxDxH: | 34 x 32 x 78.5 inches 86 x 81 x 199 centimeters |
| Heat Rejected (Maximum): | 39,000 BTUH |
| Electrical Requirements in Full Load Amps 460 / 3 / 60: | 25 Amp |
| Electrical Requirements in Full Load Amps 400 / 3 / 50: | 30 Amp |
Notes
- Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
- Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
- Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
- Mounting Points: Aluminum inserts 3/8-16 UNC standard, stainless and other threads available.
- Stray Magnetic Field: At full field with degauss coil, 85 gauss without degauss coil, at 6” (150 mm) above mounting surface.
- Blower Dimensions: Are nominal for a 460/3/60 system.
- Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
- Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
- Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
- Automatic centering with indicators and optical electronic overtravel protection.