Home / Environmental Test Equipment / Vibration / Electrodynamic Shakers / DSX-5500 Electrodynamic Shaker – 24″ armature
DSX-5500 Electrodynamic Shaker – 24″ armature
| Force Rating in Sine Peak: | 5,500 lbf 24.5 kN |
| Force Rating in Random RMS: | 5,500 lbf 24.5 kN |
| Shock vs. Load Rating Lbs / Kg: | 30g: 704 / 319 50g: 274 / 124 80g: 52 / 24 |
| Maximum Velocity—Sine Sweep in ips/mps: | 80 / 2.03 |
| Displacement: | 3” (76.2mm) pk-pk (sine, random, shock) |
| Frequency Range: | 0-2,500 Hz |
| Armature Mass: | 85 lbs 38.6 kg |
| Armature Size: | 24 inches 61 centimeters |
| Axial Resonance: | 1,800 Hz |
| Mounting Points: | 25 |
| Payload Support: | 1,000 lbs 454 kg |
| Stray Magnetic Field (gauss): | Less than 12 |
| Approx. Shaker Weight: | 6,000 lbs 2,722 kg |
| Shaker Dimensions—WxDxH: | 38 x 53 x 33 inches 97 x 134 x 84 centimeters |
| Cooling Blower Duct Diameter: | 8 inches 20 centimeters |
| Blower Motor: | 5 Hp (3.8 kW) |
| Blower Dimensions—WxDxH: | 32 x 27 x 32 inches 81 x 69 x 81 centimeters |
| Blower Weight: | 336 lbs. 152 kg |
| Airflow: | 1150 CFM (0.54 m3/s) |
| Amplifier Model: | 928/1 |
| Console Dimensions—WxDxH: | 34 x 32 x 78.5 inches 86 x 81 x 199 centimeters |
| Heat Rejected (Maximum): | 71,500 BTUH |
| Electrical Requirements in Full Load Amps 460 / 3 / 60: | 45 Amp |
| Electrical Requirements in Full Load Amps 400 / 3 / 50: | 50 Amp |
Notes
- Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass equal to or greater than twice the armature mass.
- Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
- Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
- Mounting Points: Aluminum inserts 3/8-16 UNC standard, stainless and other threads available.
- Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 5 gauss at full field. For vertical electrodynamic shaker systems only.
- Blower Dimensions: Are nominal for a 460/3/60 system.
- Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
- Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
- Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
- Automatic centering with indicators and optical electronic overtravel protection.
- This model can have payload capacity increased from 1,000lbs to 1,500lbs as an option.