Home / Environmental Test Equipment / Vibration / Repetitive Shock Vibration Table / RSL-32 Vibration Table
RSL-32 Vibration Table
| Frequency Range: | 2 - 20,000 Hz |
| Sampling Rate: | 100 kHz / channel |
| Number of Impactors: | 9 |
| Load Capacity in lbs: | 645 |
| Grid Size (inches): | 32 x 32 |
| Total Compressed Air (SCFM): | 85.5 |
| Compressed Air Per Impactor (SCFM): | 9.5 |
| Axes Excited: | 3 linear, 3 rotational |
| Acceleration Level Baretable (0-10000 Hz): | 50 grms |
| Acceleration Level (0-10000 Hz) 9B106 (5 KN export limit): | consult factory |
Notes
- Load capacity of the Vibration Table includes fixture weight.
- Grid Patterns of the Vibration Tables are 4×4 inches center. Other grid patterns available upon request
- Clean shop air at 90 psig with a dewpoint of 20°C or less when climate chamber temperature is above freezing. The dewpoint must be less than the impactor temperature while the climate chamber is below freezing. Note maximum air supply temperature above 38°C is the maximum air supply temperature. Temperature above 38°C could destroy the pneumatic impactor.
- Vibration Table specifications are subject to change without notice.