Home / Environmental Test Equipment / Temperature & Humidity / Benchtop Chamber

Benchtop Chamber

Do you have something small you need to test?

A Benchtop Environmental Chamber offers flexibility, uniformity, and control accuracy required for cost-effective environmental testing. Ideal for testing smaller products such as computer components, automobile sensors, or cell phones, a Thermotron Benchtop Environmental Chamber combines superior performance in a small, compact design well suited for research and development or personal point-of-use testing. With a wide breadth of configurations including various options for temperature testing or temperature and humidity testing, this small environmental chamber is Ethernet enabled, easy to install, and ready to work.

Specifications
Features & Options
Request Information

Model Number	Workspace Volume	Cooling Performance
S-1.0-8200 Benchtop Environmental Chamber	0.89 ft³ 25 L	42 minutes 25º to -35ºC
SM-1.0-8200 Benchtop Environmental Chamber	0.89 ft³ 25 L	11 minutes 25º to -10ºC
S-1.2-8200 Benchtop Environmental Chamber	1.2 ft³ 34 L	18 minutes 25º to -35ºC
S-1.5-8200 Benchtop Environmental Chamber	1.5 ft³ 42 L	22 minutes 25º to -35ºC
SM-1.5-8200 Benchtop Environmental Chamber	1.5 ft³ 42 L	100 minutes 25ºC to -65ºC
SM-3.5-8200 Benchtop Environmental Chamber	3.5 ft³ 99 L	50 minutes 25º to -10ºC
SM-4-8200 Benchtop Environmental Chamber	4 ft³ 113.3 L	70 minutes 25ºC to -65ºC
S-5.5-8200 Benchtop Environmental Chamber	5.5 ft³ 155 L	14 minutes 25º to -35ºC
SM-5.5-8200 Benchtop Environmental Chamber	5.5 ft³ 155 L	6 minutes 25º to -10ºC

Standard

Optional

Access Port
Access ports are available to easily reach into the environmental chamber to adjust the product under test. Most climate chambers come with one standard port. Additional ports can be added to the environmental chamber. Access Ports are constructed of stainless steel, heliarc welded to the interior liner. Environmental chamber users select the access port size and location at no additional charge. Port availability may vary depending on environmental chamber model. Custom options are available.
The following are the most standard sizes:

3" (7.5 cm)

4" (10 cm)

5" (12.5 cm)

6" (15 cm)

8" (20 cm)- HALT Chamber Only
Cable Notch

The cable notch is an optional feature located on the latch side of the environmental chamber in the door frame. The notch provides easy removal of cabling to the exterior of the environmental chamber. A plug is included to cover the open section and preserve the environment inside the test chamber.
CSA or CE Electrical Codes

For equipment going to Canada or the European Union, Thermotron can build the equipment to CSA or CE electrical codes to ensure the safety of equipment users and the facility.
Dry Air Purge

This option enables reduced moisture operation at low temperatures, dewpoints at -40°C. The system consists of a flow meter, regulator and control solenoid for program operation. It utilizes compressed air as the supply source and is very helpful in minimizing moisture in the chamber. This feature is built within the chamber, so no additional floor space is needed.
Low Humidity

A standard humidity system is designed to enable temporary operation down to -10°C dewpoint in a humidity chamber. A low humidity option will enable extended operation down to 5 grains of moisture per pound of dry air minimum limitation and humidity range from 5% RH to 98% RH. The low humidity option on a humidity chamber incorporates a dry air purge for ultra low dewpoints. It also adds a bubbler humidity system which allows small amounts of moisture to be added to the air in the humidity chamber for low humidity control. This eliminates problems associated with adding hot steam to a cold environment which creates two problems: heat that needs to be taken out of the system and steam generator oscillation.
Shelves

Often times products under test need to be placed on shelves or racks for optimized testing. Shelves and racks are custom made for each application. Every chamber comes with one adjustable shelf, more can easily be added.

ThermoTrak II

Thermotron's ThermoTrak II^™ software has innovative capabilities to make test chamber control more efficient than ever before. Designed with input from engineers worldwide, ThermoTrak II^™ has been designed to simplify lab management and improve performance by saving time, increasing productivity and cutting costs. ThermoTrak II^™ is a networking system that provides access to chamber programming, operating, data acquisition and display functions from a single PC. It allows for multiple Thermotron chamber controllers to be linked and automates and simplifies your testing process. It also allows you to run several test profiles simultaneously. The exclusive instrumentation, operating speed and equipment compatibility elevates productivity and its tracking and recording features make data collection more accurate and efficient. While the Microsoft Windows^® based environment makes setting up and using the ThermoTrak II^™ software easy. Request Download

ThermoTrak II Software Specifications
Thermotron Controllers Supported	2800, 3200, 3800, 4800, 6850, 7800, 7825, 8200, 8800, 8825, Oven
Interface Capabilities	RS232, RS485, GPIB (IEEE-488), Ethernet (TCP/IP)
Maximum Number of Controllers	Up to 32
Maximum Control Channels	4 (controller dependent)
Data Log/Graph Resolutions	Adjustable per controller; 2-3,600 second increments
Maximum Graph/Data Log Display Readings	32,000 per logged item
Maximum Data Log File	Limited only by hard drive space
Operating System Required	Microsoft Windows® 95, 98, 2000, NT, XP, Vista, 7, or 10

Boost Cooling and Heating

Boost cooling and heating options enhance performance on select environmental test equipment. Liquid nitrogen Boost and Carbon Dioxide Boost are cooling injection systems that enable faster pull-downs and product temperature change rates in an environmental chamber.
Adding the extra heat feature to your environmental chamber accelerates the test chamber's heating capabilities to improve air and product temperature change rates.
Cart

Thermotron offers several cart options for various product lines. Product Loading Carts are used in lieu of a solid AGREE chamber floor. The cart can support heavy product weights that would be cumbersome to put in and take out of the chamber. This also increases chamber utility as it will be ready to interface with an electrodynamic or repetitive shock shaker. A Benchtop Cart is an option feature for customers who do not have counter space to place a benchtop environmental chamber. A cart is available for all models.
Custom Colors
You are probably used to only seeing a Thermotron environmental chamber or electrodynamic shaker in just one of two colors – blue and gray. But we can in fact paint your piece of test equipment any color you like, provided you let us know which one.

Custom paint color is an available optional feature for equipment purchased from Thermotron, and the process is quite simple. During the quote process, you work with our Sales and Application Engineers and simply notify them what color you want your test equipment to be painted. We primarily work with RAL and FED-STD-595C – Color Standards, but if you provide us with a color and the standard it comes from we will work with our paint supplier to ensure that your environmental chamber or electrodynamic shaker is painted your specified color.

So, why would you want to have your climate chamber painted a different color? There are many reasons here are a few of the most common:

Branding – customers want to have their equipment painted to promote their brand, and incorporate their branding colors into items their staff and customers see every day.

Grouping – Some customers with many Thermotron chambers in their lab need them to be color coordinated by function, ability, or size.

Safety – We have also had customers request that only certain parts of the environmental chamber or electrodynamic shaker are painted. For example we had a customer paint all electrical panels bright orange to highlight potential safety hazards.

There are many unique reasons to specify a paint color on your environmental chamber or electrodynamic shaker, almost as many as there are colors. What color would you put on your test equipment?
Humidity

Many Thermotron environmental chambers have the optional feature of humidity to diversify the utility of the climatic chamber. Precise uniformity and tight control characterize the high-performance specifications of the humidity system. Thermotron humidity systems can be configured for a direct-feed facility hook-up or using a water reservoir. The system’s steam generator achieves high volumes of moisture with consistent water vapor levels and more repeatable test result.

The SE-Series Temperature Humidity Chambers have a patented, modular, full-range humidity system. This allows a temperature chamber to be retrofitted and upgraded to a temperature humidity chamber.

Humidity tests can be monitored through the environmental chambers’ controllers.
Oxygen Monitor

The Oxygen Monitor is mounted on the outside of the chamber when using LN₂or CO₂ Boost to ensure that the level of oxygen in the room is at a safe level or chamber users. It is a standard safety feature.
Therm-Alarm

Thermotron's Therm-Alarm™ protects against temperature extremes. Built-in self diagnostics continually monitor operating systems, tracing problems before they occur and reducing troubleshooting time. This feature provides audible, visual, and relay contact indication of a temperature which exceeds a prescribed high or low limit.
Water Purification and Recirculation System

The Water Purification and Recirculation System is an optional feature on humidity systems for Thermotron equipment. This system purifies water to be within the recommended working limits of the chamber and the recirculation aspect takes water that has already be used in the humidity system and reuses it after it has been purified.

Want more Information?
Name*
Current Thermotron Customer
- Yes
- No
Company*
Address*
Street Address City State / Province / Region ZIP / Postal Code Country
Email*
Phone*
This field is hidden when viewing the form
Country
Country
This field is hidden when viewing the form
Postal Code*
Question/Comment
By clicking below, you agree that we may process your information in accordance with our Privacy Policy.
- Subscribe to our Newsletter?
By clicking below, you agree that we may process your information in accordance with our Privacy Policy.
* Required Fields

Do you have something small you need to test?

Standard

Window

Optional

Access Port

Cable Notch

CSA or CE Electrical Codes

Dry Air Purge

Low Humidity

Shelves

ThermoTrak II

Boost Cooling and Heating

Cart

Custom Colors

Humidity

Oxygen Monitor

Therm-Alarm

Water Purification and Recirculation System

Want more Information?