Home / Environmental Test Equipment / Vibration / Electrodynamic Shakers / DSX-20000 Electrodynamic Shaker – 16″ armature
DSX-20000 Electrodynamic Shaker – 16″ armature
| Force Rating in Sine Peak: | 20,000 lbf 89 kN |
| Force Rating in Random RMS: | 20,000 lbf 89 kN |
| Shock vs. Load Rating Lbs / Kg: | 30g: 2000 / 909 50g: 2000 / 909 100g: 560 / 255 |
| Maximum Velocity—Sine Sweep in ips/mps: | 80 / 2.03 |
| Displacement: | 3” (75 mm) pk-pk (shock, random) 2" (50 mm) pk-pk (sine) |
| Frequency Range: | 0-2,400 Hz |
| Armature Mass: | 164 lbs 74.5 kg |
| Armature Size: | 16 inches 40.6 centimeters |
| Axial Resonance: | 1,960 Hz |
| Mounting Points: | 17 |
| Payload Support: | 1,000 lbs 454 kg |
| Stray Magnetic Field (gauss): | Less than 50 |
| Approx. Shaker Weight: | 9,250 lbs 4,205 kg |
| Shaker Dimensions—WxDxH: | 48 x 60 x 38 inches 122 x 153 x 99 centimeters |
| Blower Motor: | 20 Hp (15.1 kW) |
| Blower Weight: | 735 lbs 334 kg |
| Airflow: | 1100 CFM (0.49m3/s) |
| Amplifier Model: | 9160/16 |
| Console Dimensions—WxDxH: | 99 x 33 x 78.5 inches 252 x 84 x 199 centimeters |
| Heat Rejected (Maximum): | 529,000 BTUH /155kW |
| Electrical Requirements in Full Load Amps 460 / 3 / 60: | 250 Amp |
| Electrical Requirements in Full Load Amps 400 / 3 / 50: | 300 Amp |
Notes
- Force Rating Random (RMS) lbf/kN: For a uniform power spectral density, 20-2000Hz, payload mass greater than 1,000 lbs (454 Kg).
- Maximum Velocity (PK) ips/mps: Rated sine performance is “full field”. Increased velocities may be obtained with reduced field, especially in shock testing.
- Shock vs. Load Rating Lbs / Kg: Refers to 11 msec, half sine shock pulse.
- Mounting Points: Stainless inserts 1/2-13 UNC standard, other threads available.
- Stray Magnetic Field: At 6” (150 mm) above mounting surface. Degauss kit optional for reduction to less than 12 gauss at full field. For vertical electrodynamic shaker systems only.
- Blower Dimensions: Are nominal for a 460/3/60 system.
- Recommended Minimum Service: Is valid for vertical electrodynamic shaker systems only. Horizontal electrodynamic shaker systems will vary based on sliptable requirements. Other voltages are available.
- Frequency Range: Is dependent on vibration controller resolution, slew rate, and loading.
- Air Supply: 2SCFM at 90 psi (1 L/sec. at 6.2 BAR).
- Automatic centering with indicators and optical electronic overtravel protection.
- This model can have payload capacity increased from 1,000lbs to 1,500lbs or 2,000 lbs as an option.